Brief description: 230 mm Diamond Cutting Disc (SR-1250)

This diamond cutting disc is designed to cut hard materials cleanly, precisely, and efficiently—whether on a construction site or for DIY projects. It combines a long service life with smooth operation for precise results.

Suitable for

• Concrete, stone, brick, masonry, natural stone, and granite
• Dry cutting without water supply
• Standard angle grinders with a 230 mm disc mount (22.2 mm bore)
• Professional tradespeople and ambitious DIYers
  

Not suitable for

• Metal or wood
• Wet cutting with water
• Machines with a different mount or smaller disc diameter

Application – Step by Step

1. Unplug the angle grinder and mount the cutting disc according to the manufacturer’s instructions, ensuring the correct rotation direction. 
2. Securely position the angle grinder and bring it up to full speed before touching the material.
3. Guide the disc evenly and without pressure through the material—the diamond segments will do the work.
4. Maintain a constant cutting path to achieve clean and smooth edges.
5. Take short breaks during longer cuts to allow the blade and material to cool down.

Pro Tips

• A steady feed pays off: Less pressure ensures longer blade life and more precise cuts.
• Know your material: Cut particularly hard materials like granite slowly and evenly.

Care & Storage

After use, remove coarse dust and material debris. Store the cutting disc in a dry, clean place, protected from impact. Avoid direct moisture and extreme temperature fluctuations.

Disposal

Dispose of the cutting disc in accordance with local disposal and recycling regulations.

Safety Instructions

• Always wear appropriate protective equipment (safety goggles, gloves, ear protection).
• Do not tilt the cutting disc or apply lateral pressure to it.
• Do not continue to use damaged or heavily worn discs.
• Use only on materials for which it is intended.