Quick guide: 125 mm flap discs (SR-1264)

These flap discs are designed for efficient grinding, deburring and surface finishing. They deliver clean results in metalwork and ensure controlled, consistent performance.

Suitable for

• Wood and metalworking, deburring and grinding
• Angle grinders with a 125 mm disc mount
• Workshops, construction sites and DIY projects
• Users seeking to achieve uniform surfaces

Not suitable for

• Plastic or soft materials
• Wet grinding
• Machines with a different disc diameter

Application – Step by step

1. Disconnect the angle grinder from the mains and fit the flap disc in accordance with the manufacturer’s instructions.
2. Ensure that the disc is securely fitted and correctly aligned.
3. Bring the angle grinder up to full speed before making contact with the workpiece.
4. Guide the flap disc over the surface with light, even pressure.
5. Keep the disc moving constantly to achieve an even sanding finish without overheating.

Pro tips

• Less pressure, better results: The sanding flaps work more efficiently with a steady feed rate.
• Correct application: Work flat to optimally control material removal and disc wear.

Care & Storage

Store flap discs in a dry, clean place and protect them from moisture. Store used discs separately to prevent damage to the abrasive flaps.

Disposal

Dispose of worn flap discs in accordance with local disposal and recycling regulations.

Safety instructions

• Wear safety goggles, gloves and ear protection.
• Do not tilt fan discs sideways or overload them.
• Do not continue to use damaged or heavily worn discs.
• Use only with suitable angle grinders.