Quick Guide – 13-Piece Multicolor Torx Key Set (SR-1293)

The extra-long Torx key set is designed for assembly, repair, and maintenance work on Torx screws. With 13 sizes from T6 to T50, color coding, and an extra-long design, you can quickly find the right size and easily reach recessed screws.

Suitable for

• Bicycle and motorcycle repairs

• Automotive work

• Machines and technical equipment

• Furniture assembly

• Workshop and DIY projects

• Hard-to-reach Torx screws

Not suitable for

• Screw profiles other than Torx

• Work on live electrical components

• Use as a striking or levering tool

• Screws for which no exact Torx size is available

Instructions

1. Select the exact Torx size for the respective screw. The color coding helps you quickly identify the required size.

2. Insert the Torx key fully and straight into the Torx profile of the screw.

3. Use the long arm to reach recessed or hard-to-access screws.

4. Loosen or tighten the screw using steady, controlled force. The extra-long design provides increased leverage.

5. Especially with smaller Torx sizes, avoid applying excessive force to prevent damage to the tool and screw profile.

Pro Tips

• Use the color coding for quick identification. After a short period of use, you can often recognize frequently used sizes directly by their color.

• With tight screws, make sure the tool is fully and straightly seated in the Torx profile before applying increased force.

Care & Storage

• Remove dirt, oil, and moisture with a dry cloth after use.

• Store all keys clean and dry in the tool holder so they remain protected and readily available.

Disposal

• Dispose of the product according to local regulations at the end of its service life.

Safety Instructions

• Always use the exact Torx size required.

• Insert the tool fully into the screw profile.

• Do not apply excessive force, especially when using smaller sizes.

• Do not extend the keys with pipes or other tools.

• Do not continue using bent, worn, or otherwise damaged tools.

• The tools are not electrically insulated – do not use them on live electrical components.