Quick Guide Color-Coded SDS Plus Masonry Drill Bit Set (SR-1271)

This SDS Plus masonry drill bit set helps you perform precise drilling work in concrete, masonry, stone, and brick. The color-coded drill bits make it easy to identify the correct size instantly, ensuring efficient workflows on construction sites and in workshops.

Suitable for

• Concrete, masonry, stone, and brick
• Anchor and fastening applications
• Electrical and plumbing installations
• Renovation and construction projects
• SDS Plus rotary hammers

Not suitable for

• Wood or metalworking
• Machines without an SDS Plus chuck
• Levering or chiseling work
• Damaged or worn drill chucks

Use

1. Select the appropriate drill bit using the color coding and the required anchor size.
2. Fully insert the drill bit into the SDS Plus chuck and ensure it is securely seated.
3. Mark the desired drilling location and hold the machine perpendicular to the surface.
4. Start drilling with steady pressure and allow the drill bit to do the work.
5. During deep drilling, occasionally remove the drill bit to clear dust from the hole.
6. Clean the drill bit after use and return it to the storage case.

Pro Tips

• The color coding saves time, especially when frequently switching between sizes on the job site.
• Always match the drill bit size to the anchor being used for optimal results.

Care & Storage

Remove dust and material residues from the drill bit and shank after each use. Store the drill bits in a dry place inside the supplied storage case. Lightly oiling the SDS shank can help prevent corrosion.

Disposal

Dispose of the product and packaging in accordance with local regulations.

Safety Instructions

• Always wear safety glasses and appropriate protective equipment.
• Before drilling, check for electrical wires, water pipes, or gas lines in the work area.
• Do not touch the drill bit immediately after use, as it may be hot.
• Do not use damaged or dull drill bits.
• Use only with suitable SDS Plus rotary hammers.