Quick Guide Circular Saw Blade 216 × 30 × 60T (SR-1122)

This circular saw blade is designed for precise cuts in wood, laminate, and various plastics. Its durable tooth geometry ensures clean cutting results and versatile use in compatible circular saws.

Suitable for

• Solid wood and engineered wood
• Laminate
• Plastics
• Rip cuts and cross cuts
• DIY and workshop applications

Not suitable for

• Metal, stone, or concrete
• Applications exceeding the maximum permitted speed
• Damaged or warped saw blades
• Use with angle grinders

Instructions for Use

1. Disconnect the saw from the power supply or remove the battery before installing the blade.
2. Use the saw blade only on machines with the correct bore diameter and suitable spindle.
3. Ensure the blade is seated flat and securely against the machine flanges.
4. Tighten the clamping nut or fixing screw to the torque specified by the machine manufacturer. Use only suitable tools.
5. Do not extend the wrench or tighten the fixing hardware by striking it with a hammer.
6. Before installation, thoroughly clean the clamping flanges and blade contact surfaces. They must be free from dirt, grease, oil, and moisture.
7. Use reducing rings only if they are securely fitted into the saw blade. Loose adapter or reducing rings must not be used.
8. After installation, check that the blade rotates freely and does not contact the blade guard or any other machine parts.
9. Before switching on the saw, verify that the blade rotates freely and is securely fastened.
10. Perform the cut using a steady feed rate and avoid applying lateral pressure to the blade.
11. After use, switch off the saw and wait until the blade has come to a complete stop.

Pro Tips

• Secure the workpiece firmly and maintain a steady feed rate for clean cut edges.
• Remove resin and material residues regularly to maintain optimum cutting performance.

Care & Storage

Clean the saw blade after use by removing dust, resin, and material residues. Only use cleaning agents that do not affect the mechanical properties of the saw blade.

Store the blade in a dry place, protected from moisture and mechanical damage. Replace damaged or dull blades in good time.

Disposal

Dispose of the product in accordance with local regulations.

Safety Instructions

• Tools may only be used by trained and experienced persons familiar with their safe operation.
• Never exceed the maximum speed marked on the tool. Where specified, the permitted speed range must be observed.
• Inspect the blade before every use for damage, cracks, or deformation. Circular saw blades with cracked bodies must be discarded. Repair is not permitted.
• Do not use tools with visible cracks.
• Always wear safety glasses, hearing protection, and suitable protective gloves.
• Install the saw blade only in the indicated direction of rotation.
• Never change the saw blade while the saw is connected to the power supply or the battery is installed.
• Keep hands and body away from the danger zone during operation.
• Use the blade only for the intended materials.

Technical Data

Brand: STONE REEF

Item Number / Model: SR-1122

Product: Circular Saw Blade

Package Contents

• 1 × Circular Saw Blade

Suitable Materials

• Wood
• Laminate
• Plastics

Dimensions

• Diameter: 216 mm
• Bore: 30 mm
• Reducing Rings: 25.4 mm / 22.23 mm / 20 mm / 16 mm

Number of Teeth

• 60 Teeth (TCT)

Maximum Speed

• 7,000 rpm

Compatible With

Circular saws with a matching arbor, including Bosch, Makita, Einhell, and comparable machines (always verify compatibility before use).