Quick Guide Circular Saw Blade 305 × 30 × 100T (SR-1132)

This circular saw blade is designed for precise cutting in wood, laminate, and various plastics. Its durable tooth geometry ensures clean cuts and versatile use with compatible circular saws.

Suitable for

• Solid wood and engineered wood
• Laminate
• Plastics
• Rip cuts and cross cuts
• DIY and workshop applications

Not suitable for

• Metal, stone, or concrete
• Applications exceeding the maximum permitted speed
• Use with damaged or bent saw blades
• Use with angle grinders

Application

1. Disconnect the saw from the power supply or remove the battery before installation.
2. Use the saw blade only on machines with the correct bore diameter and a suitable spindle.
3. Ensure the blade sits flat and securely on the machine's clamping flanges.
4. Tighten the clamping nut or fixing screw to the torque specified by the machine manufacturer using suitable tools only.
5. Do not extend the wrench or tighten the fastening by striking it with a hammer.
6. Before installation, thoroughly clean the clamping flanges and blade contact surfaces. They must be free of dirt, grease, oil, and moisture.
7. Use reducing rings only if they are permanently and securely fitted in the saw blade. Loose adapter or reducing rings must not be used.
8. After installation, ensure the blade rotates freely without contacting the blade guard or any other machine parts.
9. Before switching on, verify free rotation and secure mounting.
10. Cut with a steady feed rate and avoid applying lateral pressure to the blade.
11. Switch off the saw after use and wait until the blade has come to a complete stop.

Pro Tips

• Secure the workpiece firmly and maintain a steady feed rate for clean cuts.
• Remove resin and material residue regularly to maintain cutting performance.

Care & Storage

• Clean dust, resin, and material residue from the blade after use. Use only cleaning agents that do not affect the blade's mechanical properties.
• Store the blade in a dry location protected from moisture and mechanical damage. Replace damaged or dull blades promptly.

Disposal

Dispose of the product according to local regulations.

Safety Instructions

• Tools may only be used by trained and experienced persons who are familiar with their safe handling.
• Never exceed the maximum speed marked on the blade. Observe the specified speed range where applicable.
• Inspect the blade before every use for damage, cracks, or deformation. Circular saw blades with cracked bodies must be discarded. Repairs are not permitted.
• Do not use tools with visible cracks.
• Always wear safety glasses, hearing protection, and suitable protective gloves.
• Install the blade only in the specified direction of rotation.
• Never change the blade while the saw is connected to the power supply or while the battery is installed.
• Keep hands and body away from the danger zone during operation.
• Use only on the intended materials.

Technical Specifications

Brand: STONE REEF

Item No. / Model: SR-1132

Product: Circular Saw Blade

Package Contents

• 1 × Circular Saw Blade

Suitable for

• Wood
• Laminate
• Plastics

Dimensions

• Diameter: 305 mm
• Bore: 30 mm
• Reducer Rings: 25.4 mm / 22.23 mm / 20 mm / 16 mm

Number of Teeth

• 100 Teeth (TCT)

Maximum Speed

• 5,500 rpm

Compatible with

• Circular saws with a matching arbor
• Including Bosch, Makita, Einhell, and comparable machines (check compatibility before use)