Quick Guide Side Cutter (SR-1085)

This side cutter combines precise cutting and wire stripping in a single tool. It is suitable for electrical installations, repairs, and cable work where clean results and efficient operation are required.

Suitable for

• Electrical installations
• Household wiring
• Control panel work
• Copper and aluminum conductors
• Cable diameters from 20–10 AWG (0.8–2.6 mm)

Not suitable for

• Live electrical conductors
• Hardened steel wires
• Cutting metal rods or screws
• Applications outside the specified cable range

Use

1. Ensure that the conductor is de-energized before starting work.
2. Select the appropriate stripping size according to the cable diameter.
3. Position the cable in the designated stripping opening and squeeze the handles together.
4. Carefully remove the insulation without damaging the conductor.
5. For cutting, position the cable between the cutting blades and cut cleanly through it.
6. Lock the tool after use and store it safely.

Pro Tips

• Using the correct stripping size prevents damage to the conductor and ensures clean results.
• The return spring facilitates repetitive work and reduces hand fatigue during extended use.

Care & Storage

Regularly clean the cutting and stripping areas to remove dust, plastic residues, and dirt. Store the tool in a dry place protected from moisture. The pivot mechanism may be lightly lubricated when necessary to ensure smooth operation over time.

Disposal

Dispose of the product in accordance with local regulations.

Safety Instructions

• Work only on de-energized conductors.
• The cutting blades are sharp – risk of injury.
• Do not use damaged or dull tools.
• Keep hands and fingers away from the cutting area.
• Keep out of reach of children.
• Do not use as a pry tool or on unsuitable materials.